Operating procedures of the most popular page disp

2022-08-20
  • Detail

Operating procedures of the page dispenser

I. what are the operating procedures of the page dispenser

answer: the operating procedures of the page machine have the following points:

(1) all preparations should be made before the machine, such as lubricating oil, roughly checking the main parts, adjusting the stop rules, and placing the whole book post in the appropriate position

(2) the storage personnel shall store the books in order after the book bucket, take out one book respectively and match it into a volume to check whether it is correct with the sample book. During the check, the receiver, assistant, storage personnel (or monitor) can match the pages only after they are confirmed to be correct

(3) the stored hanging stickers should be flat and correct, not empty, and the height of the stored stickers should not exceed 150mm of the height of the stop gauge

second, what are the operating procedures for the online package host of wireless adhesive binding linkage

answer: the operating procedures of the package host mainly include the following points:

(1) make all preparations before starting the machine, such as storing glue material, storing hot glue in advance, adjusting glue temperature, adding lubricating oil, roughly checking main parts, adjusting rules, checking whether the book block and cover are correct, etc

(2) before starting the machine, send a signal first, take care of the cooperation between the front and rear machines, count the car for trial drive, and gradually turn from slow speed to normal speed

(3) during normal operation, observe the condition of the equipment and whether the wrapped books are qualified at any time, and ensure that the bonding, clamping and shaping work are completed within the opening time of the glue liquid, so as to ensure the normal opening, curing and cooling time

(4) observe whether the glue temperature is normal at any time. It is strictly forbidden to change the use temperature of the glue and store the glue block directly into the working glue pot for use

(5) under the condition that the glue pot is cleaned on time to ensure the purity of the glue, the cleaning of the glue pot and the normal operation of the equipment, the pre glue pot is cleaned once a quarter and the glue pot is cleaned once every two weeks

III. what are the operating procedures of the book cutter on the wireless adhesive binding connecting line

answer: the operating procedures of the book cutter mainly include the following points:

(1) all preparations should be made before starting the machine, such as adding lubricating oil, checking whether the main parts and the book cutting rules are correct, whether the cutter head and conveying track are clean, and adjusting the book cutting rules and pressure

(2) send a signal before starting the machine, drive the empty car first, and then cooperate with the host after the empty cut is correct, so that the book can be cut in normal operation

(3) in case of uneven stack of books when cutting books, stop and deal with it. It is strictly forbidden to grab a knife (that is, touch the book with your hand without stopping), and check whether the size of the cut book is correct at any time, and deal with problems in time

IV. what are the operating procedures for the cleaning and inspection equipment of the wireless adhesive binding connecting line

answer: the operating procedures of cleaning and inspection equipment mainly include:

(1) clean and inspect the equipment on the whole linkage production line on time to ensure that there is no oil stain and the air path is smooth

(2) during the cleaning inspection, the problems that need minor repair or replacement of vulnerable parts should be solved immediately, and the normal operation of the equipment after the cleaning inspection should be ensured

(3) under the condition of normal operation on the equipment, the single shift (8 ~ 12 hours/day) shall be cleaned once every two weeks, and the second or third shift (more than 16 hours/day) shall be cleaned once a week, and the cleaning time is generally 4 hours

v. what are the operating procedures for the maintenance equipment of the wireless adhesive binding coupling line

answer: the operating procedures of maintenance equipment mainly include the following points:

(1) generally, intermediate maintenance is required when the linkage production line works for 3 ~ 5 years, and overhaul is required for more than 10 years, with special exceptions

(2) when the equipment needs intermediate maintenance, the intermediate maintenance requirements should be put forward by the machine receiver first, and can be carried out only after being approved by the workshop equipment director, and the time and period of intermediate maintenance should be set

(3) when the equipment needs to be overhauled, the lead machine (senior worker or above) or technical personnel should first put forward the overhaul requirements, and then formulate the overhaul plan with the consent of the workshop head. After the overhaul plan is formulated, the workshop head and the factory director in charge of the equipment of the factory are required to study and approve it, and the maintenance can be carried out after a time limit is set

(4) during the medium and overhaul operations, the machine requisition (senior worker or above) or technical personnel should follow up the maintenance until the end to assist the inspection and maintenance personnel in their work

(5) after the maintenance, the person in charge of the workshop (during intermediate maintenance) or the person in charge of the equipment of the manufacturer (during overhaul), the person in charge of the maintenance and the machine receiving party shall inspect it. After it is qualified, it is required to sign 30000, and it can be accepted and used after the filing is completed

VI. what are the operating procedures of the shell pasting machine

answer: the operating procedures of the shell pasting machine mainly include the following points:

(1) make all preparations before starting up, such as adjusting the procedures of each workbench, the position of suction arm and suction plate, and storing the plate and adding lubricating oil in advance

(2) give a signal when starting the machine, and check whether the pasted book case meets the requirements after the machine test, and the normal operation and processing can be carried out only after it is correct

(3) during normal operation, the quality of the pasted book case should be checked at any time, and the machine should be shut down immediately if the size is found to be unqualified

(4) the adhesive used for shell pasting is animal glue, and the temperature in the glue pot should be guaranteed between 75 and 10 ℃, and it is strictly forbidden to add cold water in regular use

(5) clean the glue pot on time to ensure that the adhesive fluid is normal. Generally, the glue pot should be cleaned once a quarter to avoid colloid aging and deterioration

the surface of the processed product is smooth

(6) the height of the storage board: About 200mm for 16 openings and about 300mm for 32 openings (roughly the same as the height of the storage bucket)

(7) clean and inspect the equipment on time. Under normal operation, clean and inspect the equipment every two weeks and do a good job after the shift to ensure the normal production of the next shift

VII. What are the operating procedures of the rounding and ridging machine

answer: the operating procedures of the rounding and ridging machine mainly include the following points:

(1) make all preparations before starting the machine, such as developing more effective products for the market segment according to the book size and thickness, and adjusting the rules of the book holder, rounding and ridging wedge plate

(2) for books that need to be rounded, the adhesive on the back of the book should be appropriate. The drying degree of the adhesive that develops slowly should be 70% - 80%. It is strictly forbidden to round after it is completely dry

(3) the ridging height shall be subject to the thickness of the paperboard, and the radian of the wedge-shaped plate shall be subject to the thickness of the book

(4) during normal operation, observe the rounding and ridging at any time, and deal with problems in time to ensure that the quality meets the requirements

(5) the operating procedures of cleaning and maintenance equipment are the same as those of other equipment

VIII. What are the operating procedures of the shelling machine

answer: the operating procedures of the casing machine mainly include the following points:

(1) make all preparations before starting the machine, and adjust the specifications of each rule according to the thickness of the book block

(2) for the casing machine with sweeping lining, the distance between the adhesive and the glue roller should be adjusted in advance to ensure the firmness and flatness of the books after the casing

(3) during normal operation, the effect of sleeve (lining sweeping) should be often checked, and the observation problems should be handled in time

(4) the operating procedures of cleaning and maintenance equipment are the same as those of other equipment

Copyright © 2011 JIN SHI